Axmann Fördersysteme GmbH Jürgen Ruckriegel Baumeisterallee 24-26 04442 Zwenkau Deutschland +49 34203/5970

Accumulation Chain Conveyor Type 64.20

This chain conveyor is ideal for the transportation of unit loads up to 350 kg (772 Lb), e.g. slave boards. It is mainly used as a buffering or assembly line. It features innovative materials, e.g. aluminum alloys and high-quality plastic profiles for smooth running of the chain, as well as a sleek design. The conveyor consists of an aluminum side profile, steel crossbars and a rugged side guide made from steel tubing. The aluminum profile with integrated “T” slots provides for easy attachment of peripheral items. The unit loads are moved on a ¾” chain. In case of accumulation, rotating rollers mounted inside the chain are turning contrarily to the direction of travel, thus causing only little line pressure. In order to keep the friction coefficient as low as possible, the chain runs in a plastic sliding rail. Moreover, the distance from the chain running profile to the chain is only 2 mm (0.1”), therefore optimal worker protection is guaranteed. The conveyor’s maintenance is very easy due to the head drive and tensioning unit. A spring-loaded tensioning sprocket compensates elongations of the chain and prevents an up-and-down movement of the chain. The motors are sized for 0.75 kW to 2.2 kW, depending on load speed and conveyor length.

Technical Data

Load Range

0 – 3500 N/m (0 – 350 kg/m) (0 Lb/Ft – 235 Lb/ft)

Speed (V)

0.1m/s (0.3ft/s); 0.2m/s (0.7ft/s); 0.3m/s (1.0ft/s)

Effective lane width (EL)

350 – 2000 mm (13.8” – 6.6 ft)

Chain distance (DC)

250 – 1300mm (9.8“ – 4.3ft)

Module length (ML)

1800 – 6000mm (5.9ft – 19.7ft)

Drive

3-phase gear motor, 1 HP-3 HP
230/460 VAC / 60 Hz

Power transmission

3/4” chain, maximum tractive force 2250 N

Chain running profile

PE – HHMV, black

Side guides

steel tubing, 1 1/2" x 1 1/2" (alternatively plastic side guide)

Temperature range

0°C to 45°C ambient. (23°F to 122°F)

Scope of supply

Each chain conveyor module is supplied fully assembled, without support stands. Each
drive module is equipped with a gear motor, as described above.