Axmann Fördersysteme GmbH Jürgen Ruckriegel Baumeisterallee 24-26 04442 Zwenkau Deutschland +49 34203/5970

Roller Conveyor Bend With Tangential Chain Drive Type 52.20

Roller conveyor curves with tangential chain drive can easily be integrated in a conveying system without the need for additional drives. Tapered driven rollers matching the bend radius ensure that the products being conveyed maintain their orientation within the curve section. The size and the design of the curve can be combined with all kind of AXMANN chain driven roller conveyors. The integral side guides allow a safe transportation of heavy products within the conveyor side frames. Integrated “T” slots provide easy fixing of additional equipment.

Features:

  • Individual modules can easily be combined and driven by one single drive.
  • Simple installation of modules on site.
  • Simple installation of sensors and control peripherals in profile “T” slots.
  • Integral cable channels.
  • Pre-assembled modules ready for use.
  • Low maintenance requirements.
  • Proven quality rollers.
  • Integral side guides.
  • Modern aesthetic design.

Examples of Conveyed Goods:

  • Small pallets
  • Wet or oily goods
  • Automotive parts

Typical Applications:

  • Simple transportation
  • Assembly lines
  • Automated storage conveyors

Technical Data

Load range

0 N/m – 1000 N/m (0 kg/m – 100 kg/m) (0 Lb/ft – 67 Lb/ft)

Speed at inner radius (V)

0.2 / 0.3 / 0.4 / 0.5 m/s (12 / 18 / 24 / 30 m/min)
(0.7 / 1.0 / 1.3 / 1.6 ft/s) (39.4 / 59.1 / 78.7 98.4 ft/min)

Between frame (BF)

419 mm – 919 mm in increments of 100 mm (16.5” – 36.2”) in increments of (3.9”)

Roller pitch (T)

See chart

Max. length per drive

90° + 6000 mm (19.7 ft) straight conveyor

Included angle

30°, 45°, 60°, 90°

Temperature range

0°C to 45°C ambient (23°F to 104°F)

Motor protection

IP 54

Drive

3-phase gear motor, 1/2 HP, 230/460 VAC, 60 Hz

Transmission

1/2” roller chain (side bow)

Roller type

With ball bearing, fixed drive or friction drive

Roller material

Ø 50 mm (2”) x 1,5 mm (0.06“), zinc coated steel fitted with grey polypropylene tapered sleeve sections.

Incline/decline

It is NOT recommended to incline or decline driven roller conveyors.

Scope of supply

Each roller conveyor curve module is supplied fully assembled. Each drive module is equipped with a gear motor, as specified above. If the length of the module or the combination of several modules is less than 3 m (9.8 ft) x 1.5 m (4.9 ft), the required roller conveyor sections can be supplied fully assembled.

Dimensional Variations

Included angle

30°

45°

60°

90°

Inner 1st pitch(Ti1) mm (inch)

38
(1.5)

38
(1.5)

38
(1.5)

38
(1.5)

Inner roller pitch
Ti) mm (inch)

96.0
(3.8)

76.9
(3.0)

84.2
(3.3)

76.9
(3.0)

Qty of rollers
(N)

5

8

10

16


Between frame (BF)

Outer 1st pitch ( T1)

Outer roller pitch (T)

Roller diameter at outer (D1)

Linear speed factor at outer (mm)

(mm)

(inch)

(mm)

inch)

(mm)

(inch)

(mm)

(”)

419

16.5

65.12

2.6

121.54

4.8

77.6

3.1

1.55

519

20.4

70.36

2.8

131.30

5.2

84.0

3.3

1.68

619

24.4

75.60

3.0

141.07

5.6

90.4

3.6

1.81

719

28.3

80.83

3.2

150.84

5.9

96.8

3.8

1.94

819

32.2

86.07

3.4

160.61

6.3

10.2

4.1

2.06

919

36.2

91.30

3.6

170.38

6.7

11.4

4.4

2.25